Sunday, September 28, 2008

VHDL PROGRAM OF A4049B_vhd

-- ============================================================================
-- 4049B Hex Inverting Buffers
--
-- Copyright (C),2004 Andrew John Jacobs.
--
-- This program is provided free of charge for educational purposes
--
-- Redistribution and use in binary form without modification, is permitted
-- provided that the above copyright notice, this list of conditions and the
-- following disclaimer in the documentation and/or other materials provided
-- with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS 'AS IS' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-- ============================================================================

library ieee;
use ieee.std_logic_1164.all;

entity A4049B is
generic (
tplh : time := 0 ns;
tphl : time := 0 ns);
port (
i1 : in std_logic;
i2 : in std_logic;
i3 : in std_logic;
i4 : in std_logic;
i5 : in std_logic;
i6 : in std_logic;
o1 : out std_logic;
o2 : out std_logic;
o3 : out std_logic;
o4 : out std_logic;
o5 : out std_logic;
o6 : out std_logic);
end entity;

-- ============================================================================

library ieee;
use ieee.std_logic_1164.all;

architecture dataflow of A4049B is
begin
o1 <= '1' after tplh when to_bit(i1) = '0' else
'0' after tphl;

o2 <= '1' after tplh when to_bit(i2) = '0' else
'0' after tphl;

o3 <= '1' after tplh when to_bit(i3) = '0' else
'0' after tphl;

o4 <= '1' after tplh when to_bit(i4) = '0' else
'0' after tphl;

o5 <= '1' after tplh when to_bit(i5) = '0' else
'0' after tphl;

o6 <= '1' after tplh when to_bit(i6) = '0' else
'0' after tphl;
end architecture;

No comments:

Post a Comment

Please give your suggestion and follow us if you are interested, which encourage us to create new topics for you. And Thankyou for your support.