VHDL PROGRAM OF A4027B_vhd

-- ============================================================================
-- 4027B Dual JK Flip Flop
--
-- Copyright (C),2004 Andrew John Jacobs.
--
-- This program is provided free of charge for educational purposes
--
-- Redistribution and use in binary form without modification, is permitted
-- provided that the above copyright notice, this list of conditions and the
-- following disclaimer in the documentation and/or other materials provided
-- with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS 'AS IS' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-- ============================================================================

library ieee;
use ieee.std_logic_1164.all;

entity A4027B is
 generic (
  tplh  : time := 0 ns;
  tphl  : time := 0 ns);
 port (
  s1   : in  std_logic;  -- Set
  c1   : in  std_logic;  -- Clear
  j1   : in  std_logic;  -- Data
  k1   : in  std_logic;  -- Data
  cp1   : in  std_logic;  -- Clock
  s2   : in  std_logic;
  c2   : in  std_logic;
  j2   : in  std_logic;
  k2   : in  std_logic;
  cp2   : in  std_logic;
  o1   : out  std_logic;  -- Output
  o1_n  : out  std_logic;  -- Output inverted (usually)
  o2   : out  std_logic;
  o2_n  : out  std_logic);
end entity;

-- ============================================================================

library ieee;
use ieee.std_logic_1164.all;
library work;

architecture behaviour of A4027B is
 -- Internal flip flop states
 signal ff1  : std_logic_vector (1 to 2);
 signal ff2   : std_logic_vector (1 to 2);
begin
 -- Flip flop 1
 process (cp1,s1,c1)
  variable jk  : std_logic_vector (1 to 2);
 begin
  if ((s1 or c1) = '1') then
   ff1(1) <= not (not s1);
   ff1(2) <= not (not c1);
  elsif rising_edge(cp1) then
   jk := not ((not j1) & (not k1));

   case jk is
   when "10" => ff1 <= "10";
   when "01" => ff1 <= "01";
   when "11" => ff1 <= not(ff1(1)) & not(ff1(2));
   when others =>
   end case;
  end if;
 end process;

 -- Flip flop 2
 process (cp2,s2,c2)
  variable jk  : std_logic_vector (1 to 2);
 begin
  if ((s2 or c2) = '1') then
   ff2(1) <= not (not s2);
   ff2(2) <= not (not c2);
  elsif rising_edge(cp2) then
   jk := not ((not j2) & (not k2));

   case jk is
   when "10" => ff2 <= "10";
   when "01" => ff2 <= "01";
   when "11" => ff2 <= not(ff2(1)) & not(ff2(2));
   when others =>
   end case;
  end if;
 end process;

 -- Copy state to outputs adding propagation delay
 o1   <= '1' after tplh when to_bit(ff1(1)) = '1' else
     '0' after tphl;
 o1_n <= '1' after tplh when to_bit(ff1(2)) = '1' else
   '0' after tphl;

 o2   <= '1' after tplh when to_bit(ff2(1)) = '1' else
     '0' after tphl;
 o2_n <= '1' after tplh when to_bit(ff2(2)) = '1' else
   '0' after tphl;
end architecture;