Sunday, September 28, 2008

VHDL PROGRAM OF A4040B_vhd

-- ============================================================================
-- 4030B 12-Stage Binary Counter
--
-- Copyright (C),2005 Andrew John Jacobs.
--
-- This program is provided free of charge for educational purposes
--
-- Redistribution and use in binary form without modification, is permitted
-- provided that the above copyright notice, this list of conditions and the
-- following disclaimer in the documentation and/or other materials provided
-- with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS 'AS IS' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-- ============================================================================

library ieee;
use ieee.std_logic_1164.all;

entity A4040B is
generic (
tplh : time := 0 ns;
tphl : time := 0 ns);
port (
cp_n : in std_logic;
mr : in std_logic;
o0 : out std_logic;
o1 : out std_logic;
o2 : out std_logic;
o3 : out std_logic;
o4 : out std_logic;
o5 : out std_logic;
o6 : out std_logic;
o7 : out std_logic;
o8 : out std_logic;
o9 : out std_logic;
o10 : out std_logic;
o11 : out std_logic);
end entity;

-- ============================================================================

library ieee;
use ieee.std_logic_1164.all;

architecture behaviour of A4040B is
-- Internal flip-flop states
signal ff0 : std_logic := 'U';
signal ff1 : std_logic := 'U';
signal ff2 : std_logic := 'U';
signal ff3 : std_logic := 'U';
signal ff4 : std_logic := 'U';
signal ff5 : std_logic := 'U';
signal ff6 : std_logic := 'U';
signal ff7 : std_logic := 'U';
signal ff8 : std_logic := 'U';
signal ff9 : std_logic := 'U';
signal ffa : std_logic := 'U';
signal ffb : std_logic := 'U';
begin
-- Handle async. reset and active low clock pulse
process (cp_n, mr)
begin
if (to_bit(mr) = '1') then
ff0 <= '0';
ff1 <= '0';
ff2 <= '0';
ff3 <= '0';
ff4 <= '0';
ff5 <= '0';
ff6 <= '0';
ff7 <= '0';
ff8 <= '0';
ff9 <= '0';
ffa <= '0';
ffb <= '0';
elsif falling_edge(cp_n) then
ff0 <= not ff0;

if ff0 = '1' then
ff1 <= not ff1;
end if;

if ff1 = '1' then
ff2 <= not ff2;
end if;

if ff2 = '1' then
ff3 <= not ff3;
end if;

if ff3 = '1' then
ff4 <= not ff4;
end if;

if ff4 = '1' then
ff5 <= not ff5;
end if;

if ff5 = '1' then
ff6 <= not ff6;
end if;

if ff6 = '1' then
ff7 <= not ff7;
end if;

if ff7 = '1' then
ff8 <= not ff8;
end if;

if ff8 = '1' then
ff9 <= not ff9;
end if;

if ff9 = '1' then
ffa <= not ffa;
end if;

if ffa = '1' then
ffb <= not ffb;
end if;
end if;
end process;

-- Copy flip-flop states to output adding delay
o0 <= '1' after tplh when to_bit(ff0) = '1' else
'0' after tphl;

o1 <= '1' after tplh when to_bit(ff1) = '1' else
'0' after tphl;

o2 <= '1' after tplh when to_bit(ff2) = '1' else
'0' after tphl;

o3 <= '1' after tplh when to_bit(ff3) = '1' else
'0' after tphl;

o4 <= '1' after tplh when to_bit(ff4) = '1' else
'0' after tphl;

o5 <= '1' after tplh when to_bit(ff5) = '1' else
'0' after tphl;

o6 <= '1' after tplh when to_bit(ff6) = '1' else
'0' after tphl;

o7 <= '1' after tplh when to_bit(ff7) = '1' else
'0' after tphl;

o8 <= '1' after tplh when to_bit(ff8) = '1' else
'0' after tphl;

o9 <= '1' after tplh when to_bit(ff9) = '1' else
'0' after tphl;

o10 <= '1' after tplh when to_bit(ffa) = '1' else
'0' after tphl;

o11 <= '1' after tplh when to_bit(ffb) = '1' else
'0' after tphl;
end architecture;

No comments:

Post a Comment

Please give your suggestion and follow us if you are interested, which encourage us to create new topics for you. And Thankyou for your support.